A while ago, I rediscovered a tutorial on making gems out of hot glue. With my upcoming Midnight cosplay project, I figured this tutorial would come in handy to make some of the adornments on her costume. However, I was a little scared at the idea of continuously reheating hot glue and pouring it into a mold. So, I improvised and decided to paint over the gems rather than mix in a pigment. I used a metallic paint, and finished it off with clear nail polish, and I was happy with the results.
When I posted the unpainted versions on my Instagram, I got a lot of positive feedback and some questions on how I made these, and I wanted to share with you all how I did! These are perfect if you need gemstones on your cosplay or props, and are quick to make.
- High-temperature glue gun
- Hot glue sticks
- Silicone chocolate molds
- Cooking spray
- Acrylic paint/nail polish
- X-Acto knife
- Clear nail polish
- Thick craft foam
- Napkin/paper towel
- Palette knife
- Rubbing alcohol
- Cotton ball/pads
Plug in your hot glue gun so it can begin to heat up. Take your silicone mold and the cooking spray and lightly spray the cavities. To make sure the cooking spray gets into each nook and cranny–and to remove excess oil–dab with a napkin or paper towel. Place the mold on an even surface.
Placing the tip of the glue gun as far down into the mold cavity, begin to fill from the bottom up, making sure that glue is dispensed into each corner evenly. Fill to the top. Tap the mold to disperse bubbles and settle the glue. Allow for the glue to completely cool down.
If you overfill the cavity a bit, take the palette knife and scrape off any excess.
Pro Tip!Make more gems than you actually need just in case one of them doesn’t turn out to your liking.
Once the glue has fully cooled down, remove them from the mold. If there is any oil residue from the cooking spray, take a rubbing alcohol-soaked cotton ball to clean the gem. Then, take your X-Acto knife and carefully trim off any excess.
Take your thick craft foam and lay it on a flat surface. Then, take the toothpicks and stick them in the underside of the hot glue gems, and prop them up on the craft foam. This will make the painting process less messy and easier.
Start painting the gems in thin, even layers. Let the layer dry fully before adding on any other layers. If you’re using metallic paints, I highly recommend applying a base coat of the same color. Metallic paints tend to be thin, and you don’t want many layers of paint on these shapes. Let the paint fully dry for a few hours after applying the final layer.
For a more gem-like and translucent effect, you can also use nail polish. I painted a few gems using only nail polish to test it out, and the results were sparkly and beautiful!
After the paint has fully dried, apply the clear nail polish to seal it all in. If adding additional layers, be sure to let each one dry completely. Once the final layer is dry, they’re ready to attach to your cosplay!
These are durable and pretty additions to any costume or cosplay, and they’re super easy to make! I made all of these in one day, and it’s a great little project to come back to as you work on other things.
Also, if you would like to try out other methods for casting with hot glue, here are some great tutorials that use different methods–but are just as effective!
“How to Make Gems out of Hot Glue” on Amino Apps
Life was meant to be lived nerdily, so what are you waiting for?